How to Repair a Small Drywall Hole (Step-by-Step Guide)
Small holes in drywall are one of the most common household issues—whether caused by a door handle, wall anchors, or an accidental bump. The good news is, repairing a small drywall hole is a DIY-friendly project that requires only a few tools and a little patience.
If you’d like to tackle the repair yourself, here’s a simple guide. And if you’d rather save time (and avoid the mess), our team at MDM Handyman, a trusted handyman in Cypress, TX is always ready to take care of drywall repairs for you.
What You’ll Need:
Drywall patch (store-bought kit or homemade)
Putty knife
Joint compound (spackle)
Sandpaper (120–220 grit)
Paint (to match your wall)
Primer (optional for best results)
Step 1: Clean Up the Hole
Start by removing any loose drywall around the hole. Use a utility knife to gently trim away rough edges so you have a clean, solid surface to work with.
Step 2: Choose Your Patch
There are two main ways to patch a small hole:
Option 1: Store-Bought Patch Kit
The easiest option is to grab a drywall patch kit from your local hardware store (Home Depot, Lowe’s, or even Walmart in Cypress). These kits usually come with a self-adhesive mesh patch designed to stick right over the hole. They’re quick, clean, and perfect for holes up to 6 inches wide.
Option 2: DIY Patch
If you’d rather make your own patch, you’ll need a small piece of drywall:
Cut a square piece slightly larger than the hole.
Place it over the hole and trace around it.
Use a utility knife to cut out the traced shape from the wall.
Insert the drywall piece into the opening, securing it with drywall screws into wall studs or a wood backing.
Cover seams with joint tape before applying compound.
This method takes a little more effort but works well for holes that are too big for a simple mesh patch.
Step 3: Cover with Joint Compound
Using your putty knife, spread a thin layer of joint compound over the patch, feathering out the edges so it blends smoothly into the wall. Don’t worry if it’s not perfect on the first coat—drywall repair usually takes two to three coats.
Let each coat dry completely before applying the next.
Step 4: Sand It Smooth
Once the final coat is dry, lightly sand the area until it’s flush with the surrounding wall. Be sure to wear a mask—drywall dust gets everywhere!
Step 5: Prime & Paint
For the best finish, apply primer before painting. Finally, paint over the repaired area with your wall color. After drying, your wall should look as good as new.
When to Call a Professional
While small holes are manageable for most DIYers, larger holes, cracks, or repeated drywall issues may need a professional touch. Uneven repairs can show through paint, and the process can be frustrating without the right tools.
That’s where we come in, MDM Handyman Service specializes in drywall repair in Cypress, TX. From tiny touch-ups to full wall replacements, we handle it all. If you’d rather skip the hassle (and cleanup), give us a call. We’ll make your walls look like nothing ever happened.
✅ DIY Tip: If you’re new to drywall repair, try a store-bought patch first. It’s quick, inexpensive, and easy to use.
📞 Looking for drywall repair near Cypress, TX? Contact MDM Handyman Service today for fast, professional wall repair you can trust.
